Troubleshooting

  • Camera reset – By looking at the camera rear connector with the connector cap off, locate the centre pin. Then locate the pin immediately above the centre pin. The camera circuitry can be fully reset by briefly connecting these two pins together with something conductive, like a paper clip for example. You will know the camera has been reset when you restart it, as the built in calendar will have reset as well (and you will need to re-synchronise this).
  • Camera powers down as soon as it gets started. This is due to a battery that is discharged. The battery voltage is only measured once the camera has fully booted up, and if battery is too low at that point, the camera will automatically shutdown. Switch the camera off, and charge via usb or 12V for a few hours.